Staining Maple

Article - March 14, 2007

This week’s question comes from Darin. He writes:

I am trying to finish maple to a brown appearance. I am using a dewaxed shelac as a sanding sealer and this imparts a slightly amber tone to the wood and when I apply the col. maple gel stain I get an orange tone wood instead of the brown I would like. Is there a method that you use to obtain a brown tone finish instead of the orange one I am getting.

And here was my reply:
“Hey Darin. What cut of shellac are you using? You just might be sealing the surface a bit too much, so you aren’t getting the color change you should be. Also, be sure to use a blonde shellac since that emparts little to no color at all. Do a few tests on scrap to find what works for you. I would probably recommend a 1/2lb cut to a 1 lb cut. Now if that stain still isnt dark enough, then you might want to move to a darker gel stain. The gel stain will sit on the surface more and will allow you to more effectively change the color without depending on stain absorption. Rockler has a great selection of gel stains that I use frequently. Also, if you have a spray setup, you could always use a dye mixture to get a nice even brown color. Let me know if you need more info on that method. ”

For those of you who don’t know, maple is a tricky wood to stain. It tend to absorb stain unevenly which leads to a blotchy look. By pre-sealing the wood with shellac, you can even out the color absorption. This is exactly what Darin was trying to do.

Marc's Finishing Quick Guide cover

Free from Marc

Marc’s Finishing Quick Guide

The finishing mistakes Marc sees most, in one printable guide. Big, easy to read type, made to tape to the shop wall.

  • Picking the right finish for the job
  • Scratches that show up after the finish goes on
  • Blotch control
  • Real dry, recoat and cure times
  • Rough final coats
  • Why switching products usually isn’t the fix

Thanks! Check your inbox, the guide is on its way.

Something went wrong. Please try again.

We will email you the guide. Unsubscribe any time.

Wood Finishing in Practice

Want to watch it done? Wood Finishing in Practice

11 Guild lessons, over 7 hours: oils, hardwax oils, wiping varnish, water-based, lacquer, spraying, outdoor and workbench finishes, all on real furniture. $49.

See the lessons

Prefer to read? Marc’s finishing book, $10

Advertisers